ATMEL AT17 Configurator Programming System (CPS) Version 8.07 NOTE: It is recommended that you uninstall previous version of CPS software before installing CPS 8.07. Contents ======== 1. Installation Instructions 2. CPS features 3. Installed files 4. Related documents 5. Technical support ------------------------------------------------------------------------------- 1. Installation Instructions: * Un-install all older versions of the CPS Software from the PC if one exists. * Double-click on cps807.exe in Windows Explorer to start the installation process. * Follow the instructions in InstallShield Wizard throughout the installation process. * Re-boot PC after installation. ------------------------------------------------------------------------------- 2. This release includes the following features: * Graphical User Interface * Windows 98, Windows NT, Windows 2000 and Windows XP drivers. * Fully automated installation program. * Support for AT17NXXX(A) device * Support for AT17F Flash device * Support for FPSLIC - ATFS05, ATFS10 and ATFS40 * Support for Secure FPSLIC - AT94S10 and AT94S40 * 2 megabit device support - AT17LV002(A) and AT17LV020(A) * 4 megabit device support - AT17LV040 or AT17F040 * 8 megabit device support - AT17F080 * 16 and 32 megabit device support - AT17F016 and AT17F032 * Support for Atmel BST bitstream files. * Support for Xilinx MCS bitstream files. * Support for Altera POF, RBF bitstream files. * Conversion and partitioning for Altera bitstreams up to 4M-bits. * Calibration of data rate to CPU speed. * Allows the targetting of cascaded devices during a multi-device ISP session. * Checksum option for data verification. * Quickly determine the Configurator's reset polarity. * Save and restore user settings. * Online ATDH2200E Programming Kit User's Guide. * Online CPS help. * Link to Configurator FAQ on WWW.atmel.com. * Detailed log file. ********************* New in CPS 8.07 ********************* * Add the capability of assigning an 4-digit IO Address * Change to write the log file, "cps.lst", to the bitstream output directory ********************* New in CPS 8.06 ********************* * Correct the support for Secure FPSLIC and AT17F devices * Change programming algorithm for AT94S05 and AT94S10 to 1M * Fix convertion support for 16M and 32M device * Fix Altera multiple device programming ********************* New in CPS 8.04 ********************* * Support for 16 megabit AT17F016 and 32 magabit AT17F032 device ********************* New in CPS 8.03 ********************* * Support for Windows XP * Support for AT17NXXX(A) device * Support to enable or disable the AT17LV040 internal oscillator ********************* New in CPS 8.02 ********************* * Support for 4 megabit AT17F040 and 8 megabit AT17F080 device ********************* New in CPS 8.01 ********************* * Support for FPSLIC devices - ATFS05, ATFS10 and ATFS40 ********************* New in CPS 8.00 ********************* * Support for Secure FPSLIC devices - AT94S10 and AT94S40 ********************* New in CPS 7.09 ********************* * Support for 4 megabit AT17LV040 device * Support for specifying EEPROM Density for each device in multiple device programming ********************** Bug Fix in CPS 7.08 ********************** * Fix to automatically launch CPS from System Designer * Fix to read initialization file properly in Window 95/98 ********************* New in CPS 7.06 ********************* * Support for 8-pin SOIC package * Support for Cypress conversion - hex to bitstream * Support for Windows 2000 * Support for 2 megabit AT17C/LV002(A) device * Graphic User Interface Under Device option when the Family is AT40K or AT6K: a) change original "2M" to "2M (MCM-020)" b) addition of the new device, "2M (Mono-002)" c) when "2M (Mono-002)" is chosen, A2 Bit Level is enabled and defaulted high. ********************** Bug Fix in CPS 7.06 ********************** * Fix the checksum and progress bar display for "2M (MCM-020)" device as in CPS 7.05 ------------------------------------------------------------------------------- 3. Files included in this installation are: WINDOWS 98 FILE DIRECTORY devcom.vxd \WINDOWS\SYSTEM tvichw32.dll \WINDOWS\SYSTEM mfc42.dll \WINDOWS\SYSTEM msvcrt.dll \WINDOWS\SYSTEM cps.exe cps.hlp 2200ug.hlp readme.txt WINDOWS NT FILE DIRECTORY tvichw32.sys \WINNT\SYSTEM32\DRIVERS tvichw32.dll \WINNT\SYSTEM mfc42.dll \WINNT\SYSTEM32 msvcrt.dll \WINNT\SYSTEM32 cps.exe cps.hlp 2200ug.hlp readme.txt WINDOWS 2000 FILE DIRECTORY tvichw32.sys \WINNT\SYSTEM32\DRIVERS tvichw32.dll \WINNT\SYSTEM32 cps.exe cps.hlp 2200ug.hlp readme.txt WINDOWS XP FILE DIRECTORY tvichw32.sys \WINNT\SYSTEM32\DRIVERS tvichw32.dll \WINNT\SYSTEM32 cps.exe cps.hlp 2200ug.hlp readme.txt Please note that installation must be performed from a system administrator account on Windows NT/2000/XP machines. ------------------------------------------------------------------------------- 4. Related documents: * ATDH2200E Programming Kit User's Guide * ATDH2200E Programming Kit datasheet * AT17LV device datasheets * Programming Specification for Atmel's FPGA Configuration EEPROMs * In-System Programming Cascaded Configurators * AT17A Series Conversions from Altera FPGA Serial Configuration Memories ------------------------------------------------------------------------------- 5. For technical support: * Use the ATDH2200E Programming Kit User's Guide * Review the Configurator FAQ at www.atmel.com * Contact your local Atmel representative or distributor who provided the serial programming board for technical support. * Contact your local Atmel FAE (available at most sales offices). * Contact the Atmel FPGA technical support hotline: (408) 436-4119 (9:00 AM - 6:00 PM PST). * E-mail Atmel Configurator Technical Support: configurator@atmel.com * Fax your inquiries to "Configurator Tech Support" at: (408) 487-2637 Thank you for using Atmel products!